· Draft

How to Work Out Your Profit Per Job

Profit per job is the price of the job minus everything it cost you to do it, including a fair share of your overhead. Most owners leave out that last part.

To work out your profit per job, take the price of the job and subtract what it cost you to do it. That means the parts and materials, the labor at its true cost, any other costs tied to that job, and a fair share of your overhead. What is left is the profit the job really made. Divide it by the price to get your profit margin on that job.

Most owners do the first half. They take the price, subtract parts and wages, and call the rest profit. That leaves out what labor really costs and what it costs to keep the doors open. So the job looks better on paper than it was.

How do you calculate profit per job?

Use four steps. Do them the same way on every job, so you can compare one to another.

  1. Start with the price. This is what you billed the customer, plus any change orders you billed on top.
  2. Subtract the job costs. These are the costs you would not have had without this job: parts and materials, labor hours at their true cost, subs, rented equipment, permits and dump fees. Together they are your direct costs. In an accountant's words, they are your cost of goods sold, or COGS.
  3. That gives you gross profit. Gross profit is the price minus the job costs. Divide it by the price to get the job's gross margin.
  4. Subtract the job's share of overhead. Overhead is everything it costs to run the business that is not tied to one job: rent, the office staff, trucks sitting in the yard, phones, software and your own time spent selling. Each job has to carry part of it. What is left is the job's net profit.

Line

Formula

Gross profit

Price − job costs

Gross margin

Gross profit ÷ price

Overhead share

Billable hours on the job × overhead rate

Net job profit

Gross profit − overhead share

Net job margin

Net job profit ÷ price

The two steps owners most often get wrong are the cost of labor and the share of overhead. Both are below.

What does an hour of labor really cost you?

An hour of labor costs you the wage plus benefits and payroll taxes, spread over only the hours you can bill. That is usually a lot more than the wage alone.

Start with what you pay on top of the wage. In June 2026, private employers paid an average of about 43 cents in benefits for every dollar of wages, according to the Bureau of Labor Statistics. Wages were 70% of what employers spent on their people. Benefits, which here include paid time off and payroll taxes, were the other 30%. Your own number will be different. Your bookkeeper or CPA can pull it from your payroll reports. Some owners call it the labor burden.

Then look at billable hours. A tech who is paid for eight hours may only bill six. The rest goes to driving, loading the truck, picking up parts and meetings. Those hours still cost you money. So the real cost of a billable hour is higher again.

To work it out:

  1. Take one worker's total yearly cost: wages, plus benefits and payroll taxes.
  2. Divide it by the hours they billed to jobs last year.

That is the labor cost per billable hour. Use it in your job costs, not the hourly wage.

How do you give each job its share of overhead?

The simplest way is an overhead rate per billable hour. Add up last year's overhead. Divide it by the total billable hours your whole crew worked. Then charge each job that rate for every hour it used.

This is not the only way to do it, but it is simple and it is fair to most service work. A job that takes two days of crew time uses more of the business than a job that takes two hours. If your work is very parts-heavy, you can ask your CPA about spreading overhead by job cost instead.

Do this math once a year, and again if your overhead or your crew size changes a lot. If you add an office hire, your overhead rate goes up the day they start.

A worked example

This is a made-up example. It is not a client.

For example, a plumbing company has four techs. First it works out its two rates from last year's numbers.

Rate

How it is worked out

Result

Labor cost per billable hour

$30 wage + 43% benefits and payroll taxes = $42.90, divided by 75% of hours billed

$57

Overhead per billable hour

$360,000 overhead ÷ 6,000 billable hours (4 techs × 1,500)

$60

Then it looks at one job, a water heater swap priced at a flat rate. The estimate said four tech hours. The job took seven, because the old fittings did not match and a tech went back to the supply house.

Water heater job

Estimate

Actual

Price

$3,200

$3,200

Parts and fittings

$1,400

$1,480

Labor at $57 per billable hour

$228 (4 hours)

$399 (7 hours)

Permit and haul-away

$150

$150

Gross profit

$1,422 (44%)

$1,171 (37%)

Overhead at $60 per billable hour

$240

$420

Net job profit

$1,182 (37%)

$751 (23%)

The job still made money. But it made about a third less than the estimate said. The cause was not the price. It was three extra hours and a second trip.

If that happens on one job in five, it is a small leak. If it happens on most of them, it is a pricing problem. The fix might be a better parts check before the job, a higher flat rate, or a line in the price for older homes.

How do you calculate your profit margin for the whole business?

Use the same steps as a single job, but for a whole year. Your gross margin is your yearly sales minus all job costs, divided by sales. Your net profit margin is your net income divided by your sales. Net income is what is left after every cost, both job costs and overhead.

Both numbers are on your profit and loss statement, if your bookkeeper sorts costs into job costs and overhead. If they do not, ask them to. It is the only way the P&L can tell you anything about your jobs.

Then compare the two. If gross margin is fine but net margin is thin, look at overhead. If gross margin itself is thin, look at prices and job costs. To see how your numbers stack up, read what a good profit margin is for your kind of work.

Why do some jobs lose money?

A job loses money when the hours or costs run past what the price allowed for. The usual causes are:

  • Hours run over the estimate. Return trips, callbacks and slow starts all add up.
  • Change orders that were never billed. The customer asked for "one more thing" and nobody wrote it down.
  • Costs went up after you set the price. In the Federal Reserve's 2025 survey of small employer firms, 73% said rising costs for goods, services or wages were a money problem. A price that worked last year may not work now.
  • Overhead was left out of the price. If your markup only covers job costs, every job loses a little. See how markup differs from margin.
  • The wrong kind of work. Some jobs are always tight. You may be better off doing less of them.

How often should you check profit per job?

Check a few jobs every month, and every large job when it closes. You do not need to do every small call. Pick a few of each kind of work and compare what you estimated to what happened.

The point is the gap between the estimate and the actual. A steady gap tells you your estimates are off. Job costing software, like the job tools in QuickBooks, ServiceTitan or Buildertrend, can do the math for you. But only if your crew logs hours and parts to the right job. The habit matters more than the tool.

The same idea works outside the trades. In a dental or orthopedic practice, the "job" might be one type of appointment, or one hour of the schedule. The steps do not change: price, direct costs, a share of overhead.

What we look at

Altus Financial is a business coaching firm in Northampton, MA. Job profit is part of how we look at Savings. It is one of the four areas we work in.

In the Discovery step, we work out your true labor cost and overhead rate with you. Then we look at a year of jobs by kind of work, so you can see what really pays. For trade firms, there is more on coaching for trade owners.

Your CPA keeps the books and handles the taxes. We work alongside them, using the numbers they already keep.

Job profit and cash are two different things. A job can make a good profit and still leave you short on payday. That is covered in why profit is not cash.

Want to know what your jobs really make? Book a Founders Call. It takes 20 to 30 minutes.

Sources

  1. In June 2026, private industry employers paid $32.82 an hour in wages and $14.07 in benefits; wages were 70.0% and benefits 30.0% of compensation costs. "About 43 cents per dollar of wages" is $14.07 ÷ $32.82 = 0.43 U.S. Bureau of Labor Statistics, Employer Costs for Employee Compensation, June 2026 (USDL-26-1494, released September 9, 2026)
  2. 73% of small employer firms said increased costs of goods, services and/or wages were a financial challenge in the prior 12 months Federal Reserve Banks, Small Business Credit Survey: 2026 Report on Employer Firms (2025 survey), p. 3

Questions

Frequently asked.

How do I calculate profit per job?

Take the price of the job. Subtract parts and materials, labor at its true cost, and other costs tied to that job. That gives you gross profit. Then subtract the job's share of overhead, using an overhead rate per billable hour. What is left is net job profit. Divide it by the price for the margin.

What should be included in job costs?

Anything you would not have spent without the job. That means parts and materials, labor hours at their full cost, subs, rented equipment, permits and dump fees. Rent, office staff, phones and software are overhead, not job costs. Each job carries a share of overhead through your overhead rate instead.

How do I work out my overhead rate?

Add up last year's overhead. Divide it by the total hours your crew billed to jobs. That gives you overhead per billable hour. Charge each job that rate for every hour it used. Redo the math once a year, or sooner if you add staff, trucks or space.

What is the difference between gross profit and net profit on a job?

Gross profit is the price minus the job's own costs: parts, labor and other direct costs. Net profit also takes out the job's share of overhead. A job can show a healthy gross profit and still make little or nothing once it carries its fair part of the cost of running the business.

How often should I check job profit?

Check every large job when it closes, and a few smaller jobs of each kind every month. Compare the estimate to what really happened. One job running over is normal. The same kind of job running over again and again means your estimates or your prices need to change.

Keep Reading

Talk to a consultant

Got a question about your own business?

Start with a short call. It takes 20 to 30 minutes, and we both work out if we can help.

Important information

The content on this website is for informational and educational purposes only. It is not intended as, and should not be relied upon as, legal, tax, accounting, or investment advice.

Individual circumstances vary. You should consult your own attorney and CPA before acting on any information presented here. Altus Financial does not draft legal documents, give legal advice, or render tax or accounting opinions.